Misc. Parts

  • Set of 10, laser decals 1.5" square, or smaller. May include Danger, Caution, & Aperture, interlock types. Picture shows a typical decal assortment that may vary .
  • New power supply modules made by Emco High Voltage Corp. model C80N. Ideal for Capacitor charging, Photomultiplier tubes, and more. Specifications: Input Voltage:  11.5 to 16 VDC Input Current: 300 mA max Output Voltage:  0 to -8000 VDC Program Voltage:  0 to 5 VDC Output Current: 125 uA max Dimensions: 75 x 32 x 15 mm See this LINK for spec sheet.
  • Newport model HVM-1i, 1 inch mirror / optics mount, industrial, vertical drive with 2 Locking Allen-keys
    Used mounts in in good working condition. The adjusters were sealed with a dab of thread-lock. This is easily removed by backing out the lock and adjuster a little bit and cleaning the threads with a cotton applicator and acetone.
    Specifications:
    Mechanism:             Kinematic
    Optic Diameter:       25.4 mm
    Adj Screw Thread:   80 TPI
    Adjustments:            θx, θy
    Sensitivity:                2.5 arc sec
    Angular Range:        ±3.5°
    Material:                   Anodized Aluminum
    Drive Type:               Allen-Key, locking
    Mounting Thread:     8-32
    Optical Axis Height:  25.4 mm
    Special Features:     Slim Profile
  • Newport model U100-A3H Ultima 1.0 inch mirror mount, clear edge, 3 Locking Allen-keys
    Used mounts in in good working condition. The adjusters were sealed with a dab of thread-lock. This is easily removed by backing out the lock and adjuster a little bit and cleaning the threads with a cotton applicator and acetone.
    Specifications:
    Mechanism:            Kinematic
    Optic Diameter:       25.4 mm
    Adj Screw Thread:  100 TPI
    Adjustments:           θx, θy, Z
    Sensitivity:               3.8 arc sec
    Angular Range:       ±7°
    Material:                  Anodized Aluminum
    Drive Type:              Allen-Key, locking
    Mount Thread:         8-32
  • New thermoelectric Peltier module made by Laird Technologies model SH10,23,06,L. Ideal for cooling laser diodes, crystals, detectors, and more. Specifications: Voltage: 2.6 VDC max. Current: 3 Amps max. Heat Pump: 5 Watt max. (cold side) Input leads: 16 AWG, 115 mm long. Dimensions: 15 x 15 x 3.6 mm, 7 mm diameter hole in center. See this LINK for the complete specification sheet.
  • New thermoelectric Peltier module made by Laird Technologies model CP10,63,08,L1. Ideal for cooling laser diodes, crystals, detectors, and more. Specifications: Voltage: 8 VDC max. Current: 3 Amps max. Heat Pump: 12 Watt max. (cold side) Input leads: 16 AWG, 150 mm long. Dimensions: 30 x 15 x 4 mm See this LINK for spec sheet.
  • Voltage controlled variable optical attenuator. This is a used unit mfg. by Xerox for use with a linear polarized Helium Neon laser. The unit uses a electro-optic element and a stationary optic to variably attenuate the laser output power. A simple 0 to 3 VDC low current (less than 1mA) input is all that is needed to operate. The laser output can be fully attenuated at 0 volts or 3 volts depending on the light input plane of polarization and can produce an attenuation ratio of around 50:1. The assembly also has a beam splitter and a photodiode that taps a small amount of the attenuated light for use in a feedback loop circuit. The front optic is a cylindrical lens that can be removed if desired.

Title

Go to Top