Solder clips allow to you to attache wires or ballast resistors to the electodes of laser tubes. It is not recommended to solder directly to the tube. This set fits large laser tubes such as our HNT-5 tube with .37 to .42" diameter electrodes. They also have a #4 mounting hole.
This is a set of 2 clips.
-
-
Solder clips allow to you to attache wires or ballast resistors to the electodes of laser tubes. It is not recommended to solder directly to the tube. This set fits small laser tubes such as our HNT-1 tube with .36" diameter electrodes. This is a set of 2 clips. -
Male Alden style high voltage connector with 6 feet (1.8M) of coax. Coax cable is rated at 15KVDC. -
Male Alden style, high voltage connector with 2 feet (0.6M) wire leads. Silicon wire leads are rated at 30KVDC, 22AWG -
Nylon cradle mounts for 1 to 1.5" diameter laser tubes. Mounts accept a cable tie to secure the tube to the mount. Dimensions are 1" x .64" x .42" with a .20" diameter mounting hole. Set of 2 cradle mounts. -
Nylon cradle mount for 1.5" to 2" diameter laser heads. Mounts accept a cable tie to secure the head to the mount. Dimensions are 1.65" x .73" x .63" with a .177" diameter mounting hole. Set of 2 cradle mounts. -
Melles Griot model 05-FDS-207 fiber optic laser beam delivery system in factory box. This model is designed for peak efficiency at 633nm but will also work well with Yellow and Orange HeNe lasers . It produces a well collimated beam and maintains polarization. This is a used, tested system.
System includes:
-
Kinematic fiber launch with standard laser head mount
-
1 meter fiber optic cable with pre-aligned optics
-
-
Female Alden style, high voltage connector with 6 feet (1.8M) of coax. Coax cable is rated at 15 KVDC. -
Female Alden style, high voltage connector with 2 feet (0.6M) wire leads. Silicon wire leads are rated at 30KVDC, 22AWG -
High quality German made beam expander / collimating lens system, focusable and adjustable from 2x to 8x magnification. The anti-reflective coatings are optimized for 633 to 980nm. Dimensions are 150mm long by 42mm dia. max. Mounting dia. (center section) is 37.6mm. . -
Alden style, high voltage extension cable with a male and female connector. Coax cable is 6 feet (1.8M) long and rated at 15KVDC. -
A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. 75K ohm, 5 Watt wire wound ballast resistor. Recommended for HeNe laser tubes that operate on 8mA or less.