HeNe Parts

  • A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. Dale RS-10, 100K ohm, 10 Watt wire wound ballast resistor. Recommended for large HeNe laser tubes that operate up to 10mA.
  • A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. Dale CW-10, 50K ohm, 10 Watt wire wound ballast resistor. Recommended for large HeNe laser tubes that operate up to 14mA.
  • A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. Dale NS-5-69, 20K ohm,  5 Watt, non-inductive wire wound ballast resistor. Recommended for HeNe laser tubes that operate up to 15.8mA.
  • High quality German made beam expander / collimating lens system, focusable and adjustable from 2x to 8x magnification. The anti-reflective coatings are optimized for 633 to 980nm.  Dimensions are 150mm long by 42mm dia. max. Mounting dia. (center section) is 37.6mm. .
  • Melles Griot model 05-FDS-207 fiber optic laser beam delivery system in factory box. This model is designed for peak efficiency at 633nm but will also work well with Yellow and Orange HeNe lasers .  It produces a well collimated beam and maintains polarization. This is a used, tested system.

    System includes:

    • Kinematic fiber launch with standard laser head mount
    • 1 meter fiber optic cable with pre-aligned optics
    Factory specs found HERE Installation manual found HERE

Title

Go to Top