-
A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. 75K ohm, 5 Watt wire wound ballast resistor. Recommended for HeNe laser tubes that operate on 8mA or less. -
Solder clips allow to you to attache wires or ballast resistors to the electodes of laser tubes. It is not recommended to solder directly to the tube. This set fits small laser tubes such as our HNT-1 tube with .36" diameter electrodes. This is a set of 2 clips. -
Male Alden style, high voltage connector with 2 feet (0.6M) wire leads. Silicon wire leads are rated at 30KVDC, 22AWG -
Male Alden style high voltage connector with 6 feet (1.8M) of coax. Coax cable is rated at 15KVDC. -
Alden style, high voltage extension cable with a male and female connector. Coax cable is 6 feet (1.8M) long and rated at 15KVDC. -
Solder clips allow to you to attache wires or ballast resistors to the electodes of laser tubes. It is not recommended to solder directly to the tube. This set fits large laser tubes such as our HNT-5 tube with .37 to .42" diameter electrodes. They also have a #4 mounting hole.
This is a set of 2 clips. -
We stock Voltex HeNe laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. These are new units Specifications: Input Voltage: 10 to 15 VDC, 15 to 20 Watts. Output Voltage: 1900 to 2600 VDC. Output Current: 4.5 to 7 mA, user adjustable. Trigger Voltage: 10 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.75 X 1.5 X 1.0 inches (95 x 38 x 25 mm) Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. Features: 4 second Turn-on delay (defeat by cutting violet wire loop) TTL turn-on (yellow wire to ground=ON) Alden high voltage output connector. -
Female Alden style, high voltage connector with 2 feet (0.6M) wire leads. Silicon wire leads are rated at 30KVDC, 22AWG -
A Ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. 100K ohm, 2 Watt metal oxide ballast resistor. Recommended for HeNe laser tubes that operate on 4.5mA or less. -
These are new, hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information.SPECIFICATIONS:
Manufacture / Part Number: Melles Griot, model 05-LHP-122 Output Power: 2.0 mW minimum, 2.5 mW typical Wavelength: 632.8 nm RED Polarization: Linear polarized >500:1 Mode: TEMoo Beam Diameter: 0.80 mm Beam Divergence: 1.35 mRads. Light Exit: Cathode end of tube. Operating Voltage: 1400 VDC (1850 VDC with 75K ballast). Start Voltage: 10 KV. Operating Current: 6.5 mA Ideal Recommended Ballast Resistor: 75 K Ohms, 5 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-21, F-22, DG-22, LAB-S-22. Dimensions: 8.9" (228mm) long x 1.45" (36.8mm) diameter. Warranty: Limited 30 days from date of purchase. -
Nylon cradle mounts for 1 to 1.5" diameter laser tubes. Mounts accept a cable tie to secure the tube to the mount. Dimensions are 1" x .64" x .42" with a .20" diameter mounting hole. Set of 2 cradle mounts. -
A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. 68K ohm, 3 Watt metal oxide ballast resistor. Recommended for HeNe laser tubes that operate on 6.5mA or less -
We stock Voltex Hene laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. Specifications: Input Voltage: 110 / 220 VAC, 50 to 60 Hz. Output Voltage: 1900 to 2600 VDC. Output Current: 4 to 7 mA, user adjustable. Trigger Voltage: 10 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.5" X 2.5" X 1.0" Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. -
We stock Voltex HeNe laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. These are new units Specifications: Input Voltage: 10 to 14 VDC, 15 to 20 Watts. Output Voltage: 1100 to 1800 VDC. Output Current: 3 to 6.5 mA, user adjustable. Trigger Voltage: >8KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.75 X 1.5 X 1.0 inches (95 x 38 x 25 mm) Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. Features: 4 second Turn-on delay (defeat by cutting violet wire loop) TTL turn-on (yellow wire to ground=ON) Alden high voltage output connector. -
We stock Voltex Hene laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. These are new units Specifications: Input Voltage: 22 to 30 VDC, 15 to 20 Watts. Output Voltage: 1900 to 2600 VDC. Output Current: 4.5 to 7 mA, user adjustable. Trigger Voltage: 10 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.75 X 1.5 X 1.0 inches (95 x 38 x 25 mm) Mounting holes: 2.3 inches center spacing. Warranty: 30 days from date of purchase.Features:
4 second Turn-on delay (defeat by cutting violet wire loop) TTL turn-on (yellow wire to ground=ON) Alden high voltage output connector. -
We stock Voltex Hene laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. Specifications: Input Voltage: 110 / 220 VAC, 50 to 60 Hz. Output Voltage: 2400 to 3200 VDC. Output Current: 5 to 7 mA, user adjustable. Trigger Voltage: 10 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.5" X 2.5" X 1.0" Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. -
Laser Drive inc. model number 380T-2700-3900-6.5-4 This new, re-labeled power supply will operate a typical 18 to 25 inch long HeNe laser. Hook-up diagram included. Specifications: Input Voltage: 100-120 / 200-230 VAC, 50 to 400 Hz. Output Voltage: 2700 to 3900 VDC. Output Current: 5.5 to 7.0 mA user adjustable. Preset at 6.5 mA Trigger Voltage: >12 KV Input Leads: 12", 22 AWG. Flying. Output Leads: 12", Alden high voltage connector. CDRH delay: 4 seconds. (Defeatable by cutting violet wire loop) Dimensions: 7" X 2.4" X 1.4" (178 x 61 x 36 mm) Mounting holes: 0.15" diameter x 3, 2.95" x 1.8" center spacing. Warranty: 30 days from date of purchase. -
A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. Dale RS-10, 100K ohm, 10 Watt wire wound ballast resistor. Recommended for large HeNe laser tubes that operate up to 10mA. -
New voltex inc lab style Helium Neon laser power supply. Features include:- Universal AC power input: 100 to 240 VAC 50/60 Hz.
- CDRH compliance: Key switch, pilot light, turn-on delay, and remote interlock.
- CE compliance
- Compact size: only 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm)
- High efficiency: >85% conversion efficiency for cool operation and long life.
- Internal bleed-down resistor: to reduce shock hazard from the laser head.
-
New Helium Neon laser system that includes:- Cylindrical laser head
- Lab style power supply
- Alden extension cable
- Users manual
Specifications: Output Power: 1.5 mW minimum 1.9 mW typical Wavelength: 543.5 nm Green Polarization: Random Mode: TEMoo Beam Diameter: 0.88 mm Beam Divergence: 1.0 mRads. Input Voltage: 110 / 220 VAC, 50-60 Hz. Dimensions: Head: 521 mm long 44.5 mm dia. Power Supply: 204 mm long 107 mm wide 36 mm tall Warranty: Limited 1 year from date of purchase. CDRH Class: 3a
-
New Helium Neon laser system that includes:- Cylindrical laser head
- Lab style power supply
- Alden extension cable
- Users manual
Specifications: Output Power: 1.7 mW minimum 2.5 mW typical Wavelength: 632.8 nm RED Polarization: Linear, 500:1 Mode: TEMoo Beam Diameter: 0.80 mm Beam Divergence: 1.35 mRads. Input Voltage: 110 / 220 VAC, 50-60 Hz. Dimensions: Head: 274 mm long 44.5 mm dia. Power Supply: 204 mm long 107 mm wide 36 mm tall Warranty: Limited 1 year from date of purchase. CDRH Class: 3a
-
Nylon cradle mount for 1.5" to 2" diameter laser heads. Mounts accept a cable tie to secure the head to the mount. Dimensions are 1.65" x .73" x .63" with a .177" diameter mounting hole. Set of 2 cradle mounts. -
We stock Voltex HeNe laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. Specifications: Input Voltage: 110 / 220 VAC, 50 to 60 Hz. Output Voltage: 1300 to 1900 VDC. Output Current: 3 to 6 mA, user adjustable. Trigger Voltage: >8 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.5" X 2.5" X 1.0" Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. -
New Helium Neon laser system that includes:
- Cylindrical laser head
- Lab style power supply
- Alden extension cable
- Users manual
Specifications: Output Power: 8.0 mW minimum, 9.0 mW typical Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.80 mm Beam Divergence: 1.0 mRads. Input Voltage: 110 / 220 VAC, 50-60 Hz. Dimensions: Head: 432 mm long 44.5 mm dia. Power Supply: 204 mm long 107 mm wide 36 mm tall Warranty: Limited 1 year from date of purchase. CDRH Class: 3b
