-
A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. 68K ohm, 3 Watt metal oxide ballast resistor. Recommended for HeNe laser tubes that operate on 6.5mA or less -
A Ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. 100K ohm, 2 Watt metal oxide ballast resistor. Recommended for HeNe laser tubes that operate on 4.5mA or less. -
Solder clips allow to you to attache wires or ballast resistors to the electodes of laser tubes. It is not recommended to solder directly to the tube. This set fits small laser tubes such as our HNT-1 tube with .36" diameter electrodes. This is a set of 2 clips. -
A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. Dale NS-5-69, 20K ohm, 5 Watt, non-inductive wire wound ballast resistor. Recommended for HeNe laser tubes that operate up to 15.8mA. -
A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. 75K ohm, 5 Watt wire wound ballast resistor. Recommended for HeNe laser tubes that operate on 8mA or less. -
Nylon cradle mounts for 1 to 1.5" diameter laser tubes. Mounts accept a cable tie to secure the tube to the mount. Dimensions are 1" x .64" x .42" with a .20" diameter mounting hole. Set of 2 cradle mounts. -
Solder clips allow to you to attache wires or ballast resistors to the electodes of laser tubes. It is not recommended to solder directly to the tube. This set fits large laser tubes such as our HNT-5 tube with .37 to .42" diameter electrodes. They also have a #4 mounting hole.
This is a set of 2 clips. -
A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. Dale RS-10, 100K ohm, 10 Watt wire wound ballast resistor. Recommended for large HeNe laser tubes that operate up to 10mA. -
A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. Dale CW-10, 50K ohm, 10 Watt wire wound ballast resistor. Recommended for large HeNe laser tubes that operate up to 14mA. -
Nylon cradle mount for 1.5" to 2" diameter laser heads. Mounts accept a cable tie to secure the head to the mount. Dimensions are 1.65" x .73" x .63" with a .177" diameter mounting hole. Set of 2 cradle mounts. -
Female Alden style, high voltage connector with 2 feet (0.6M) wire leads. Silicon wire leads are rated at 30KVDC, 22AWG -
Male Alden style, high voltage connector with 2 feet (0.6M) wire leads. Silicon wire leads are rated at 30KVDC, 22AWG -
Female Alden style, high voltage connector with 6 feet (1.8M) of coax. Coax cable is rated at 15 KVDC. -
Male Alden style high voltage connector with 6 feet (1.8M) of coax. Coax cable is rated at 15KVDC. -
Alden style, high voltage extension cable with a male and female connector. Coax cable is 6 feet (1.8M) long and rated at 15KVDC. -
Out of stock
The Melles Griot model L08105-1 will operate most 15 to 21 inch long HeNe tubes or heads. Hook up sheet included. These are used units, tested and working.Specifications:
Input: 10.5 to 14 VDC, 1.7 to 2.2 Amp Output: 2500 to 3100 VDC, 5.5 to 7.0mA, user adjustable (preset @ 6.5mA) Start voltage: >10KV Dimensions: 4.75" x 2.96" x 1.25" (121 x 75 x 32mm)Features:
4 second Turn-on delay (defeat by cutting violet wire loop) TTL turn-on (yellow wire to ground=ON) Alden high voltage output connector. RoHS compliant -
The Melles Griot model 05-PSAA-905-065 will operate most 8 to 14 inch long HeNe tubes. These are new units and have European standard wire color code. Specifications: Input Voltage: 115 / 230 VAC ±10%, 50 to 400 Hz. Output Voltage: 1850 to 2450 VDC. Output Current: 5.5 to 7 mA, preset at 6.5 mA. Trigger Voltage: >10 KV Input Leads: 4.5 inches, 22 AWG. Flying. Output Leads: Flying, 10 inches cathode lead with tube clip, 5 inches anode lead with slide-on ballast resistor (80K Ohm). Dimensions: 6.0 x 1.5 x 1.2 inches (154 x 39 x 31 mm) Mounting holes: 2.3 inch center spacing.Features:
4 second Turn-on delay (defeat by cutting violet wire loop) Output current adjustable with onboard trimpot. RoHS compliant. -
These are new, hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. This tube produces an output beam at both the anode and cathode ends of the tube. Please email us for more information.SPECIFICATIONS:
Manufacture / Part Number: Melles Griot, model LGR024 Output Power: 0.2 mW minimum, 0.3 mW typical Wavelength: 543.5 nm GREEN Polarization: Random Mode: multimode Beam Diameter: 0.63 mm Beam Divergence: 1.26 mRads. Light Exit: about equal amounts at both the anode and cathode ends of the tube. Operating Voltage: 1560 VDC (with 75K ballast). Start Voltage: 10KV. Operating Current Range: 4.5 mA Ideal. Recommended Ballast Resistor: 68K Ohms, 3 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, F-15, DG-15 Dimensions: 8.45" long x 1.12" diameter. Warranty: Limited 30 days from date of purchase. -
High quality German made beam expander / collimating lens system, focusable and adjustable from 2x to 8x magnification. The anti-reflective coatings are optimized for 633 to 980nm. Dimensions are 150mm long by 42mm dia. max. Mounting dia. (center section) is 37.6mm. . -
These are new, hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information.
SPECIFICATIONS:
Manufacture / Part Number: Melles Griot, model LGR120 Output Power: 150 uW typical, Wavelength: 543.5 nm GREEN Polarization: Random Mode: TEMoo Beam Diameter: 0.85 mm Beam Divergence: 1.2 mRads. Light Exit: Cathode end of tube. Operating Voltage: 1650 VDC (with 75K ballast). Start Voltage: 10KV. Operating Current Range: 4.0 -6.0mA , 5.0 mA Ideal. Recommended Ballast Resistor: 75K Ohms, 5 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-21, F-22, DG-22, LAB-S-22. Dimensions: 8.5" long x 1.5" diameter. Warranty: Limited 30 days from date of purchase. -
Laser Drive inc. model number 380T-2700-3900-6.5-4 This new, re-labeled power supply will operate a typical 18 to 25 inch long HeNe laser. Hook-up diagram included. Specifications: Input Voltage: 100-120 / 200-230 VAC, 50 to 400 Hz. Output Voltage: 2700 to 3900 VDC. Output Current: 5.5 to 7.0 mA user adjustable. Preset at 6.5 mA Trigger Voltage: >12 KV Input Leads: 12", 22 AWG. Flying. Output Leads: 12", Alden high voltage connector. CDRH delay: 4 seconds. (Defeatable by cutting violet wire loop) Dimensions: 7" X 2.4" X 1.4" (178 x 61 x 36 mm) Mounting holes: 0.15" diameter x 3, 2.95" x 1.8" center spacing. Warranty: 30 days from date of purchase. -
Out of stock
The Melles Griot model 05-LPM-968-065 will operate most 8 to 11 inch long HeNe tubes or heads. These are new units and have European standard wire color code. Specifications: Input Voltage: 115 / 230 VAC ±10%, 50 to 400 Hz. Output Voltage: 1600 to 2000 VDC. Output Current: 5.5 to 7 mA, preset at 6.5 mA. Trigger Voltage: >10 KV Input Leads: 10 inches, 22 AWG. Flying. Output Leads: Alden high voltage connector Dimensions: 6.0 x 1.5 x 1.2 inches (154 x 39 x 31 mm) Mounting holes: 2.3 inch center spacing.Features:
4 second Turn-on delay (defeat by cutting violet wire loop) Alden high voltage output connector. Output current adjustable with onboard trimpot RoHS compliant -
These are new, old stock, hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. Specifications: Output Power: 4.5 mW minimum, 6.0 mW typical, 8.0 mW maximum. Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.50 mm Beam Divergence: 1.8 mRads. Light Exit: Cathode end of tube. Operating Voltage: 2490 VDC (with 75K ballast). Start Voltage: 10KV. Operating Current Range: 6 to 7 mA, 6.5 mA Ideal. Recommended Ballast Resistor: 75K Ohms, 5 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: DG-22, E-21, LAB-S-22. Dimensions: 13.8" long x 1.42" diameter. (350 x 36 mm) Warranty: Limited 30 days from date of purchase. -
Out of stock
Laser Drive inc. model number 314T-2450-6-4 Specifications: Input Voltage: 115 / 230 VAC, 50 to 400 Hz. Output Voltage: 2450 VDC. ∓200V Output Current: 6.5 mA Trigger Voltage: >10 KV Input Leads: 7", 22 AWG. Flying. Output Leads: Alden high voltage connector. CDRH delay: 3 to 5 seconds. (Defeatable by cutting violet wire loop) Dimensions: 4.3" x 3" x 1.2" (110 x 76 x 30 mm) Mounting holes: 0.15 diameter x3. 2.3" x 2.5" center spacing. Warranty: 30 days from date of purchase. RoHS Compliant -
The Melles Griot model 05-LPM-900-045 will operate most 6 to 8 inch long HeNe tubes or heads. These are new units and have Japanese standard wire color code. Specifications: Input Voltage: 100/200 VAC ±10%, 50 to 400 Hz. Output Voltage: 1150 to 1350 VDC. Output Current: 4.5 mA, fixed Trigger Voltage: 10 KV Input Leads: 12 inches, 22 AWG. Flying. Output Leads: Alden high voltage connector Dimensions: 4.3 x 3.0 x 1.2 inches (109 x 76 x 31 mm) Mounting holes: 2.3 and 2.5 inch center spacing.Features:
4 second Turn-on delay (defeat by cutting violet wire loop) Alden high voltage output connector RoHS compliant -
Out of stock
Melles Griot model number 05-LPM-915-065 This is a new, old stock power supply that will operate a typical 17 to 20 inch long HeNe laser head. Specifications: Input Voltage: 115 / 230 VAC, 50 to 400 Hz. Output Voltage: 3100 to 3700 VDC. Output Current: 5.5 to 7.0 mA user adjustable. Preset at 6.5 mA Trigger Voltage: >12 KV Input Leads: 12", 22 AWG. Flying. Output Leads: 12", Alden high voltage connector. CDRH delay: 4 seconds. (Defeatable by cutting violet wire loop) Dimensions: 7" X 2.4" X 1.4" (178 x 61 x 36 mm) Mounting holes: 0.15" diameter x 3, 2.95" x 1.8" center spacing. Warranty: 30 days from date of purchase. -
Out of stock
The Melles Griot model 05-LPM-905-065 will operate most 11 to 15 inch long HeNe tubes or heads. These are new power supplies and have European standard wire color code. Specifications: Input Voltage: 115 / 230 VAC ±10%, 50 to 400 Hz. Output Voltage: 1850 to 2450 VDC. Output Current: 5.5 to 7 mA, preset at 6.5 mA. Trigger Voltage: >10 KV Input Leads: 12 inches, 22 AWG. Flying. Output Leads: Alden high voltage connector Dimensions: 6.0 x 1.5 x 1.2 inches (154 x 39 x 31 mm) Mounting holes: 2.3 inch center spacing.Features:
4 second Turn-on delay (defeat by cutting violet wire loop) Alden high voltage output connector. Output current adjustable with onboard trimpot RoHS compliant -
Laser Drive Inc. model number 314S-1250-4-1 This is a new power supply with USA standard wire colors. It will operate a typical 5 to 7 inch long HeNe laser. Hook-up diagram included. Specifications: Input Voltage: 115 / 230 VAC, 50 to 400 Hz. Output Voltage: 1250 VDC ±200 VDC Output Current: 4.0 mA Trigger Voltage: >10 KV Input Leads: 12", 22 AWG. Flying. Output Leads: 12" Flying. CDRH delay: None Dimensions: 4.25" X 3.3" X 1.25" (108 x 84 x 32 mm) Mounting holes: 0.15" diameter 3x, 2.5" x 2.3" center spacing. Warranty: 30 days from date of purchase. -
Melles Griot model number 05-LPM-914-065 This is a new power supply with a TTL disable function. It will operate a typical 8 to 11 inch long HeNe laser. Hook-up diagram included. Specifications: Input Voltage: 115 / 230 VAC, 50 to 400 Hz. Output Voltage: 1550-1950 VDC Output Current: 5 to 7 mA. adjustable via trim pot. preset at 6.5 mA Trigger Voltage: >10 KV Input Leads: 12", 22 AWG. Flying. Output Leads: 7" with Alden HV connector CDRH delay: None TTL function: 0 VDC = ON, 5 VDC = OFF White wire with yellow stripe:+, White wire with black stripe:- Dimensions: 4.25" X 3.3" X 1.25" (108 x 84 x 32 mm) Mounting holes: 0.15" diameter 3x, 2.5" x 2.3" center spacing. Warranty: 30 days from date of purchase. -
Out of stock
Laser Drive inc. model number 314T-2300-6-4 Specifications: Input Voltage: 115 / 230 VAC, 50 to 400 Hz. Output Voltage: 2300 VDC. ∓200V Output Current: 6.0 mA Trigger Voltage: >10 KV Input Leads: 7", 22 AWG. Flying. Output Leads: Alden high voltage connector. CDRH delay: 3 to 5 seconds. (Defeatable by cutting violet wire loop) Dimensions: 4.3" x 3" x 1.2" (110 x 76 x 30 mm) Mounting holes: 0.15 diameter x3. 2.3" x 2.5" center spacing. Warranty: 30 days from date of purchase. RoHS Compliant -
Out of stock
The Melles Griot model 05-LPM-902-065 will operate most 11 to 15 inch long HeNe tubes or heads. These are new units with European standard wire color code. Specifications: Input Voltage: 115 / 230 VAC ±10%, 50 to 400 Hz. Output Voltage: 1850 to 2450 VDC. Output Current: 5.5 to 7 mA, preset at 6.5 mA. Trigger Voltage: >10 KV Input Leads: 8 inches, 22 AWG. Flying. Output Leads: Alden high voltage connector Dimensions: 4.3 x 3.0 x 1.2 inches (109 x 76 x 31 mm) Mounting holes: 2.3 and 2.5 inch center spacing.Features:
4 second Turn-on delay (defeat by cutting violet wire loop) Alden high voltage output connector. Output current adjustable with onboard trim-pot -
Laser Drive Inc. model number 380T-2900-7-4 This is a new power supply with Japanese standard wire colors. It will operate a typical 18 to 25 inch long HeNe laser. Hook-up diagram included. Specifications: Input Voltage: 100-120 / 200-230 VAC, 50 to 400 Hz. Output Voltage: 3900 VDC ±200 VDC Output Current: 7.0 mA ±1.0mA user adjustable via trim pot. Preset at 7.0 mA Trigger Voltage: >12 KV Input Leads: 12", 22 AWG. Flying. Output Leads: 12", Alden high voltage connector. CDRH delay: 4 seconds. (Defeatable by cutting violet wire loop) Dimensions: 7" X 2.4" X 1.4" (178 x 61 x 36 mm) Mounting holes: 0.15" diameter 3x, 2.95" x 1.8" center spacing. Warranty: 30 days from date of purchase. -
Out of stock
New Melles Griot model 05-PSAE-829-045 DC input power supplySpecifications:
Input: 10 to 14 VDC, 1.2 Amps. 16 Watts max Output: 1100-1500 VDC, 4.5 mA fixed. Start voltage: >10KV Dimensions: 4.2" x 3.3" x 1.25" (107 x 84 x 32mm)Features:
Low Noise Alden high voltage output connector. -
These are new, hard sealed laser tubes for your OEM, replacement, or experimental needs. For output stability, it is recommended that the tube be mounted in a housing, held by non metallic (thermally isolated) mounts 2 to 3 inches in from each end on the glass reservoir.
Specifications:
Manufacture / Part Number: Melles Griot, model 05-LGR-192 Output Power: 1.2mW minimum, 1.6mW typical, 2.2mW maximum. Wavelength: 543.5nm GREEN Polarization: Random Mode: TEMoo Beam Diameter: 0.80mm Beam Divergence: 0.86mRads. Light Exit: Cathode end of tube. Operating Voltage: 2800 VDC (with 75K ballast). Start Voltage: 12KV. Operating Current Range: 6 to 7mA, 6.5mA Ideal. Recommended Ballast Resistor: 75K Ohms, 5 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: DG-28, SR-40, LPM-846-065. Dimensions: 19" long x 1.5" diameter. -
These are new, hard sealed laser tubes for your OEM replacement or experimental needs. This assembly includes the laser tube mounted on a bracket with the ballast resistor and Alden high voltage connector inplace.Specifications:
MFG / Model: Melles Griot 05-LHR-286 Output Power: 2.0 mW minimum 2.8 mW typical 3.9 mW maximum. Wavelength: 632.8 nm RED Polarization: random Mode: TEMoo Beam Diameter: 0.59 mm Beam Divergence: 1.35 mRads Light Exit: Cathode end of tube. Operating Voltage: 2000 VDC Start Voltage: 10KV. Operating Current: 6.5 mA Recommended Power Supply: DG-22, E-21, LAB-S-22. Dimensions: 10.4 x 2 x 2 inches Warranty: Limited 30 days from date of purchase.
-
These are new, hard sealed laser tubes for your OEM replacement or experimental needs. This assembly includes the laser tube mounted on a bracket with the ballast resistor and Alden high voltage connector inplace.
Specifications:
MFG / Model: Melles Griot 05-LHP-120-287 Output Power: 2.0 mW minimum 2.8 mW typical 3.9 mW maximum. Wavelength: 632.8 nm RED Polarization: linear / 500:1 Mode: TEMoo Beam Diameter: 0.59 mm Beam Divergence: 1.35 mRads Light Exit: Cathode end of tube. Operating Voltage: 2000 VDC Start Voltage: 10KV. Operating Current: 6.5 mA Recommended Power Supply: DG-22, E-21, LAB-S-22. Dimensions: 10.4 x 2 x 2 inches Warranty: Limited 30 days from date of purchase.
