-
The LDS-2 is a PC mount, three pin electrical socket that fits both 5.6mm and 9mm diameter base diodes. The socket accepts laser diodes with wire leads 24 to 26 gauge, 0.016 to 0.020 inches (0.41 to 0.51 mm) diameter. The maximum recommended current is 3 Amps. Specifications: Insulator: Teflon Sleeve: Brass Contact Plating: Beryllium Copper Plating: Gold over all contacts and sleeves Outside dimensions: 0.4" long x 0.25" (10.2 x 6.35 mm) diameter. Pin Spacing: 3 pins centered around a 0.10" (2.54 mm) circle -
Out of stock
The LDA-1 is a brass adapter that converts a 5.6mm diameter base laser diode into a 9mm diameter base laser diode. It also places the emitter at the correct height. Note: The laser diode is a press fit into the adapter. -
The Mitsubishi ML720J11S-03 are DFB (Distributed Feedback) laser diodes emitting light beam with emission wavelength around 1310 nm. They are well suited for light source in long distance digital transmission systems. They are hermetically sealed devices with the photo diode for optical output monitoring. These are new diodes, individually characterized, in factory envelopes. SPECIFICATIONS: Output Power: 5 mW Wavelength: 1310 nm typical, +/-3 nm Operating Voltage: 1.1 Volts typical Threshold Current: 6 mA typical Operating Current: 16 mA typical Monitor Current: 200 uA typical Package: TO-18, 5.6 mm diameter base.A factory spec sheet can be found HERE Note: Due to the sensitive nature of laser diodes, there is no warranty or exchanges on these items.
-
The Samsung SLD63518262 is a InGaAlP laser diode with quantum well structure. It has a built in photo diode for monitoring the laser output for use in automatic power control (APC) circuits. The common case pin is laser diode cathode and photo diode anode. Specifications: Output Power: 5.0mW typical, 7.0mW maximum Wavelength: 637nm typical, 645nm maximum. RED Operating Voltage: 2.2 Volts typical Threshold Current: 30mA typical Operating Current: 40mA typical Monitor Current: 0.3mA typical. Operating Temperature: -10 to 60 deg.C Package: TO-18, 5.6mm diameter base Factory spec sheet found HERE Note: Due to the sensitive nature of laser diodes, there is no warranty or exchanges on these items. -
The Mitsubishi ML920J16S-21 are DFB (Distributed Feedback) laser diodes emitting light beam with emission wavelength around 1470 nm. They are well suited for light source in long distance digital transmission application of coarse WDM. They are hermetically sealed devices with the photo diode for optical output monitoring. These are new diodes, individually characterized, in factory envelopes. SPECIFICATIONS: Output Power: 5 mW Wavelength: 1470 nm typical, +/-3 nm Operating Voltage: 1.0 Volts typical Threshold Current: 6 mA typical Operating Current: 21 mA typical Monitor Current: 500 uA typical Package: TO-18, 5.6 mm diameter base.A factory spec sheet can be found HERE
Note: Due to the sensitive nature of laser diodes, there is no warranty or exchanges on these items.
-
The Toshiba TOLD9200 is a gain guided laser diode with InGaAlP structure. It was the first commercially available visible laser diode with a wavelength of 670nm. It has a built in photo diode for monitoring the laser output for use in automatic power control (APC) circuits. The common case pin is laser diode anode and photo diode cathode. Specifications: Output Power: 2.0mW typical, 3.0mW maximum Wavelength: 670nm typical, 680nm maximum, RED Operating Voltage: 2.3 Volts typical Threshold Current: 76mA typical Operating Current: 85mA typical Monitor Current: 0.45mA typical Operating Temperature: -10 to 50 deg.C Package: TO-9, 9mm diameter base Factory spec sheet can be found HERE Note: Due to the sensitive nature of laser diodes, there is no warranty or exchanges on these items. -
The Mitsubishi ML920J11S-29 are DFB (Distributed Feedback) laser diodes emitting light beam with emission wavelength around 1550 nm. They are well suited for light source in long distance digital transmission application of coarse WDM. They are hermetically sealed devices with the photo diode for optical output monitoring. These are new diodes, individually characterized, in factory envelopes. SPECIFICATIONS: Output Power: 5 mW Wavelength: 1550 nm typical, +/-3 nm Operating Voltage: 1.0 Volts typical Threshold Current: 9 mA typical Operating Current: 28 mA typical Monitor Current: 300 uA typical Package: TO-18, 5.6 mm diameter base.A factory spec sheet can be found HERE
Note: Due to the sensitive nature of laser diodes, there is no warranty or exchanges on these items.
-
The Hitachi HL-6312G is a index guided laser diode with multi-quantum well structure. It has a built in photo diode for monitoring the laser output for use in automatic power control (APC) circuits. The common case pin is laser diode anode and photo diode cathode. Specifications: Output Power: 5.0 mW typical, 6.0 mW maximum Wavelength: 635 nm typical, 640 nm maximum, RED Operating Voltage: 2.6 Volts typical Threshold Current: 20 mA typical Operating Current: 55 mA typical Monitor Current: 0.4 mA typical Operating Temperature: -10 to 50 deg.C Package: TO-9, 9 mm diameter base A factory spec sheet can be found HERE Note: Due to the sensitive nature of laser diodes, there is no warranty or exchanges on these items. -
Out of stock
The LDD-10 is a laser diode power supply that provides automatic current control (ACC) regulation. It comes as an unassembled kit, 7 parts + PC board and instructions. Requires basic soldering and electronic skills. A multimeter, wire, and power source, along with your laser diode & heatsink is also needed for set-up. The bottom picture shows an assembled kit with our cat.# LDC-1 collimating lens, not included. Specifications: Input Voltage: 6 to 9 VDC, a 9 volt battery works well. Input Current: 26 to 125mA, depending on output setting. Output Current: 11 to 109mA, user adjustable. Regulation: ACC, automatic current control. Dimensions: 1.4" x 0.5" -
The LDC-3 is a universal collimating lens system that fits 5.6mm diameter base diodes. The laser diode press fits in the back of the lens assembly. The lens can be adjusted with a small spanner wrench or flat blade screwdriver. Specifications: Lens type: Single element Acrylic Focal length: .315" (8mm) Numerical aperture: .28 Beam diameter: .165" (4.2mm) Base material: Brass Dimensions: 0.57" (14.5mm) long x .414" (10.5mm) diameter.
-
The LDC-LP-A390 is a clone of the Kodak A390 glass collimating lens, but with an AR coating optimized for 405nm and the new green output laser diodes. These are new lenses manufactured by LightPath Technologies. -
The LDC-13 is a universal collimating lens system that fits 9mm diameter base diodes. This housing requires the diode be glued or potted inside the unit. It requires a large screwdriver or spanner to focus the lens which simply screws in place. Specifications: Lens type: single element Acrylic, AR coated. Focal length: .242", 6.14mm. Numerical aperture: .28 Beam diameter: .134", 3.4mm Base material: anodized Aluminum Outside dimensions: 1.0" x .75" x .75" Mounting: 2x #440 tapped holes with .625" spacing on both the bottom, and output side of the unit.
