HeNe Parts

HeNe Laser to Fiber Optic Beam Delivery

$345.00

Melles Griot model 05-FDS-207 fiber optic laser beam delivery system in factory box. This model is designed for peak efficiency at 633nm but will also work well with Yellow and Orange HeNe lasers . It produces a well collimated beam and maintains polarization. This is a used, tested system.

System includes:

Kinematic fiber launch with standard laser head mount
1 meter fiber optic cable with pre-aligned optics

Factory specs found HERE Installation manual found HERE

Add to cart Details

Beam Expander / Collimator 2-8x adjustable 633-980nm

$125.00

High quality German made beam expander / collimating lens system, focusable and adjustable from 2x to 8x magnification. The anti-reflective coatings are optimized for 633 to 980nm. Dimensions are 150mm long by 42mm dia. max. Mounting dia. (center section) is 37.6mm. .

Add to cart Details

20K Ohm 5 Watt Ballast Resistor

$3.00

A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. Dale NS-5-69, 20K ohm, 5 Watt, non-inductive wire wound ballast resistor. Recommended for HeNe laser tubes that operate up to 15.8mA.

Add to cart Details

50K Ohm 10 Watt Ballast Resistor

$5.00

A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. Dale CW-10, 50K ohm, 10 Watt wire wound ballast resistor. Recommended for large HeNe laser tubes that operate up to 14mA.

Add to cart Details

100K Ohm 10 Watt Ballast Resistor

$5.00

A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. Dale RS-10, 100K ohm, 10 Watt wire wound ballast resistor. Recommended for large HeNe laser tubes that operate up to 10mA.

Add to cart Details

Solder Clip Set C

$4.00

Solder clips allow to you to attache wires or ballast resistors to the electodes of laser tubes. It is not recommended to solder directly to the tube. This set fits large laser tubes such as our HNT-5 tube with .37 to .42" diameter electrodes. They also have a #4 mounting hole.

This is a set of 2 clips.

Add to cart Details

Solder Clip Set A

$3.00

Solder clips allow to you to attache wires or ballast resistors to the electodes of laser tubes. It is not recommended to solder directly to the tube. This set fits small laser tubes such as our HNT-1 tube with .36" diameter electrodes. This is a set of 2 clips.

Add to cart Details

Laser Tube Cradle Mount Set

$4.00

Nylon cradle mounts for 1 to 1.5" diameter laser tubes. Mounts accept a cable tie to secure the tube to the mount. Dimensions are 1" x .64" x .42" with a .20" diameter mounting hole. Set of 2 cradle mounts.

Add to cart Details

Laser Head Cradle Mount Set

$6.00

Nylon cradle mount for 1.5" to 2" diameter laser heads. Mounts accept a cable tie to secure the head to the mount. Dimensions are 1.65" x .73" x .63" with a .177" diameter mounting hole. Set of 2 cradle mounts.

Add to cart Details

Alden Connector Extension Cord

$65.00

Alden style, high voltage extension cable with a male and female connector. Coax cable is 6 feet (1.8M) long and rated at 15KVDC.

Add to cart Details

Male Alden Style Connector with Coax

$24.00

Male Alden style high voltage connector with 6 feet (1.8M) of coax. Coax cable is rated at 15KVDC.

Add to cart Details

Female Alden Style Connector with Coax

$24.00

Female Alden style, high voltage connector with 6 feet (1.8M) of coax. Coax cable is rated at 15 KVDC.

Add to cart Details

Title