- Universal AC power input: 100 to 240 VAC 50/60 Hz.
- CDRH compliance: Key switch, pilot light, turn-on delay, and remote interlock.
- CE compliance
- Compact size: only 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm)
- High efficiency: >85% conversion efficiency for cool operation and long life.
- Internal bleed-down resistor: to reduce shock hazard from the laser head.
-
New voltex inc lab style Helium Neon laser power supply. Features include: -
Melles Griot Lab style Helium Neon laser power supply model 05-LPL-944-080 or equivalent. These are used units, tested and in good condition. Power supplies include: 1 key, remote interlock connector, and a power cord for North America. Please call or email us for more information. Equivalent model numbers: Melles Griot: 25-LHP-928-249, 25-LHR-928-249, 25-LHP-928-230, 25-LHR-928-230 Coherent: 31-2488-000 Laser heads it will operate Melles Griot models: 05- LHP-827, 05-LHR-827, 05-LHP-927, 05-LHR-927, 05-LHP-928, 05-LHR-928, 25-LHP-928-xxx, 25-LHR-928-xxx. Coherent models: 31-2140, 31-2157 Specifications: Input: 115 / 230 VAC 50-400 Hz. Output: 4400-5300 VDC, 7-9mA* (factory preset at 8.0mA) *Output current adjustable via internal trim potentiometer.* ** Please contact us if you would like us to preset the current to a specified amount.** Start voltage: >15KV. CDRH delay: 3 to 5 seconds. Defeatable by cutting internal violet wire loop. Output connector: Alden high voltage connector or equivalent. Remote interlock: Jones plug type series circuit. Jumpered connector included. Dimensions: 2.1 x 6.3 x 9.5 inches ( 54 x 161 x 242 mm). Warranty: 30 days from date of purchase. -
New voltex inc lab style Helium Neon laser power supply. Features include:- Universal AC power input: 100 to 240 VAC 50/60 Hz.
- CDRH compliance: Key switch, pilot light, turn-on delay, and remote interlock.
- CE compliance
- Compact size: only 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm)
- High efficiency: >85% conversion efficiency for cool operation and long life.
- Internal bleed-down resistor: to reduce shock hazard from the laser head.
-
Out of stock
These are lightly used, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.Specifications:
Mfg./part#: Melles Griot model 05-LGP-151-234. Output Power: 0.5 mW minimum 0.8 mW typical Note: A green HeNe will appear 4 times as bright as a red HeNe of the same output power. Wavelength: 543.5 nm GREEN Polarization: Linear, >500:1 Mode: TEMoo Beam Diameter: 0.77 mm Beam Divergence: 0.90 mRads. Aperture Mount: 4x 4-40 tapped holes, 25.4mm square spacing. Operating Voltage: 2390 VDC. Start Voltage: 10 KV. Operating Current Range: 6 to 7 mA, 6.5 mA Ideal. Input Leads: Male Alden connector with a 229 mm long cord. (extension cord available) Recommended Power Supply: LAB-S-22, DG-22, E-21, F-22. Dimensions: 396 mm long x 44.5 mm diameter.
-
Voltex Inc. Lab style Helium Neon laser power supply. Features include: Universal AC power input: 100-120 / 200-240 VAC 50/60 Hz. CDRH compliance: Key switch, pilot light, turn-on delay, and remote interlock. Compact size: only 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm) High efficiency: >85% conversion efficiency for cool operation and long life. Internal bleed-down resistor: to reduce shock hazard from the laser head. Specifications: Input: 100-120 / 200-240 VAC 50/60 Hz. Uses business machine type AC cord. Includes an AC cord with a North American standard connector. Output: 3200-4000 VDC, 5 to 9.5 mA* (factory preset at 6.5mA) *Output current adjustable via internal trim potentiometer.* ** Please contact us if you would like us to preset the current to a specified amount.** Start voltage: >12KV. Line filtering: Internal EMI line filter. Output fault protection: Open circuit, short circuit, and arc conditions. CDRH delay: 3 to 5 seconds. Defeatable by cutting internal violet wire loop. Output connector: Alden high voltage connector or equivalent. Remote interlock: Jones plug type low voltage series circuit. Jumpered connector included. Dimensions: 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm). Warranty: Limited 1 year from date of purchase. -
New, old stock, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.Specifications: Output Power: 16 mW minimum, 20 mW typical Wavelength: 632.8nm RED Polarization: Random Mode: Multi-mode Beam Diameter: 1.47 mm Beam Divergence: 1.4 mRads. Aperture Mount: 4x 3-0.5 mm tapped holes 25mm square spacing. Operating Voltage: 2480 VDC. Start Voltage: 10KV. Operating Current Range: 6.5 to 7 mA. Input Leads: Male Alden connector with a 150 mm long cord. (extension cords available) Recommended Power Supply: LPM-903-070, DG-28 , LAB-S-28 Dimensions: 510 mm long x 44.5 diameter. Warranty: Limited 30 days from date of purchase.
-
These are rebuilt heads with new laser tubes installed for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.
Specifications:
Output Power: 1.9 mW minimum, 2.4 mW typical, 3.5 mW maximum. Wavelength: 632.8nm RED Polarization: Linear, 500:1 Mode: TEMoo Beam Diameter: 0.80 mm Beam Divergence: 1.35 mRads. Aperture Mount: 4x 4-40 threaded holes, 25.4 mm Square spacing. Operating Voltage: 1800 VDC. Start Voltage: 10KV. Operating Current Range: 5.5 to 6.5 mA, 6.0 mA Ideal. Input Lead: Male Alden connector with a 229 mm long cord. (extension cord available) Recommended Power Supply: LAB-S-22, DG-22, E-21, F-22. Dimensions: 274 mm long 44.5 mm diameter. Warranty: Limited 30 days from date of purchase.
-
These are new, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.
Specifications:
Output Power: 12 mW minimum 14mW typical Wavelength: 632.8nm RED Polarization: Random (linear polarization may be availible. Please email us for availability) Mode: TEMoo Beam Diameter: 0.80m Beam Divergence: 1.0 mRads. Aperture Mount: 4x 4-40 tapped holes 25.4 mm square spacing. Operating Voltage: 3200 VDC. Start Voltage: 12KV. Operating Current Range: 6.0 to 7.0 mA, 6.5mA Ideal. Input Lead: Male Alden connector with a 229 mm long cord. (extension cord available) Recommended Power Supply: DG-28, LAB-S-28 Dimensions: 483 mm long x 44.5 mm diameter. Warranty: Limited 30 days from date of purchase. -
These are new, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.Specifications:
Output Power: 0.5 mW minimum 0.8 mW typical Wavelength: 1523 nm INFRARED Polarization: Random, (linear 500:1 may be available, please call or email for availability) Mode: TEMoo Beam Diameter: 0.83 mm Beam Divergence: 2.31 mRads. Aperture Mount: 4x 4-40 tapped holes 25.4 mm square spacing. Operating Voltage: 2000 VDC. Start Voltage: 10 KV. Operating Current Range: 5.5 to 6.5 mA, 6.0 mA Ideal. Input Lead: Male Alden connector with 1.8 meter long cord. Recommended Power Supply: LAB-S-22, DG-22, E-21, F-22. Dimensions: 401 mm long x 44.5 mm diameter. Warranty: Limited 30 days from date of purchase.
-
These are used, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.
Specifications: Output Power: 17 mW minimum, 19 mW typical Wavelength: 632.8nm RED Polarization: Linear 500:1 Mode: TEMoo Beam Diameter: 0.80m Beam Divergence: 1.0 mRads. Aperture Mount: 4x 3-0.5 mm tapped holes 25mm square spacing. Operating Voltage: 3800 VDC. Start Voltage: 12KV. Operating Current Range: 6.5 to 7 mA. Input Leads: Male Alden connector with a 203 mm long cord. (extension cords available) Recommended Power Supply: 380T-2700-3900-6.5-4, T-36, LAB-ST-36. Dimensions: 660 mm long x 44.5 diameter. Warranty: Limited 30 days from date of purchase.
-
These are new, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.
Specifications: Output Power: 7.0 mW minimum 8.0 mW typical Wavelength: 632.8nm RED Polarization: Random (linear polarization may be available on request) Mode: TEMoo Beam Diameter: 0.80mm Beam Divergence: 1.0 mRads. Aperture Mount: 4x 4-40 tapped holes 25.4 mm square spacing. Operating Voltage: 2800 VDC. Start Voltage: 10KV. Operating Current Range: 6 to 7 mA, 6.5 mA Ideal. Input Leads: Male Alden connector with 225 mm cord length. (extension cord available) Recommended Power Supply: LAB-S-28, DG-28. Dimensions: 431 mm long 44.5 mm diameter. Warranty: Limited 30 days from date of purchase. -
These are new, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.
Specifications:
Output Power: 5.0 mW minimum 6.4 mW typical Wavelength: 632.8nm RED Polarization: Linear 500:1 (Random may be available, please call or email for availability) Mode: TEMoo Beam Diameter: 0.80mm Beam Divergence: 1.0 mRads. Aperture Mount: 4x 4-40 tapped holes 25.4 mm square spacing. Operating Voltage: 2450 VDC. Start Voltage: 10KV. Operating Current Range: 6 to 7 mA, 6.5 mA Ideal. Input Lead: Male Alden connector with a 178 mm long cord. (extension cord available) Recommended Power Supply: LAB-S-22, DG-22, E-21, F-22. Dimensions: 401 mm long x 44.5 mm diameter. Warranty: Limited 30 days from date of purchase.