-
Out of stock
These are new, old stock hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. SPECIFICATIONS: Manufacture / Part Number: Melles Griot, model 05-LHR-004 Output Power: 0.6 mW minimum Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.47 mm Beam Divergence: 1.7 mRads Light Exit: Cathode end of tube. Operating Voltage: 1290 VDC (with 68 K ballast) Start Voltage: 8 KV Operating Current: 3.0-4.5mA, 3.7mA Ideal Recommended Ballast Resistor: 68 K Ohms, 3 Watt (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15 Dimensions: 5.3" (145 mm) long x 1.0" (25.4 mm) diameter Warranty: Limited 30 days from date of purchase. -
Out of stock
These are new, old stock laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information.SPECIFICATIONS:
Manufacture / Part Number: Melles Griot, model 05-LHR-410 / Gammex 201A393 Output Power: 0.6 mW minimum, 1.4 mW typical Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.95 mm Beam Divergence: 1.35 mRads Light Exit: Cathode end of tube Operating Voltage: 1290 VDC with 75K ballast Start Voltage: 10 KV Operating Current: 4.5 mA Ideal Recommended Ballast Resistor: 75 K Ohms, 3 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15, LAB-S-15 Dimensions: 7.9" (200mm) long x 1.45" (37mm) diameter. Warranty: Limited 30 days from date of purchase. -
These are new, old stock laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. SPECIFICATIONS: Manufacture / Part Number: Uniphase model 1007 Output Power: 0.8 mW minimum Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.48 mm Beam Divergence: 1.7 mRads. Light Exit: Anode end of tube. Operating Voltage: 1250 VDC (with 68 K ballast). Start Voltage: 8 KV. Operating Current: 4.0 mA Ideal. Recommended Ballast Resistor: 68 K Ohms, 2 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15 Dimensions: 5.8" (148 mm) long x 1.0" (25.4 mm) diameter. Warranty: Limited 30 days from date of purchase. -
Out of stock
These are new, old stock hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. SPECIFICATIONS: Manufacture / Part Number: Uniphase model 1018 Output Power: 2.0mW minimum Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.55 mm Beam Divergence: 1.5 mRads. Light Exit: Cathode end of tube. Operating Voltage: 1700 VDC (with 68 K ballast). Start Voltage: 8 KV. Operating Current: 4.5 mA Ideal. Recommended Ballast Resistor: 68 K Ohms, 2 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15 Dimensions: 7.5" (191 mm) long x 1.0" (25.4 mm) diameter. Warranty: Limited 30 days from date of purchase. -
The Melles Griot model 05-LPM-905-065 will operate most 11 to 15 inch long HeNe tubes or heads. These are new power supplies and have European standard wire color code. Specifications: Input Voltage: 115 / 230 VAC ±10%, 50 to 400 Hz. Output Voltage: 1850 to 2450 VDC. Output Current: 5.5 to 7 mA, preset at 6.5 mA. Trigger Voltage: >10 KV Input Leads: 12 inches, 22 AWG. Flying. Output Leads: Alden high voltage connector Dimensions: 6.0 x 1.5 x 1.2 inches (154 x 39 x 31 mm) Mounting holes: 2.3 inch center spacing.Features:
4 second Turn-on delay (defeat by cutting violet wire loop) Alden high voltage output connector. Output current adjustable with onboard trimpot RoHS compliant -
Melles Griot Lab style Helium Neon laser power supply model 05-LPL-915-065 or equivalent. These are used units, tested and in good condition. Power supplies include: 1 key, remote interlock connector, and a power cord for North America. Other versions may be available including Japanese input voltage, 6 and 7 mA output versions. Please call or email us for more information. Specifications: Input: 115 / 230 VAC 50-400 Hz. Output: 3100-3700 VDC, 6 to 7 mA* (factory preset at 6.5mA) *Output current adjustable via internal trim potentiometer.* ** Please contact us if you would like us to preset the current to a specified amount.** Start voltage: >12KV. CDRH delay: 3 to 5 seconds. Defeatable by cutting internal violet wire loop. Output connector: Alden high voltage connector or equivalent. Remote interlock: Jones plug type series circuit. Jumpered connector included. Dimensions: 2.1 x 6.3 x 9.5 inches ( 54 x 161 x 242 mm). Warranty: 30 days from date of purchase. -
Melles Griot Lab style Helium Neon laser power supply model 05-LPL-944-080 or equivalent. These are used units, tested and in good condition. Power supplies include: 1 key, remote interlock connector, and a power cord for North America. Please call or email us for more information. Equivalent model numbers: Melles Griot: 25-LHP-928-249, 25-LHR-928-249, 25-LHP-928-230, 25-LHR-928-230 Coherent: 31-2488-000 Laser heads it will operate Melles Griot models: 05- LHP-827, 05-LHR-827, 05-LHP-927, 05-LHR-927, 05-LHP-928, 05-LHR-928, 25-LHP-928-xxx, 25-LHR-928-xxx. Coherent models: 31-2140, 31-2157 Specifications: Input: 115 / 230 VAC 50-400 Hz. Output: 4400-5300 VDC, 7-9mA* (factory preset at 8.0mA) *Output current adjustable via internal trim potentiometer.* ** Please contact us if you would like us to preset the current to a specified amount.** Start voltage: >15KV. CDRH delay: 3 to 5 seconds. Defeatable by cutting internal violet wire loop. Output connector: Alden high voltage connector or equivalent. Remote interlock: Jones plug type series circuit. Jumpered connector included. Dimensions: 2.1 x 6.3 x 9.5 inches ( 54 x 161 x 242 mm). Warranty: 30 days from date of purchase.
-
We stock Voltex HeNe laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. These are new units Specifications: Input Voltage: 22-30 VDC, 10 to 15 Watts. Output Voltage: 1300 to 1900 VDC. Output Current: 3 to 6 mA, user adjustable. Preset at 4.5 mA Trigger Voltage: >8KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.75 X 1.5 X 1.0 inches (95 x 38 x 25 mm) Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. Features: 4 second Turn-on delay (defeat by cutting violet wire loop) TTL turn-on (yellow wire to ground=ON) Alden high voltage output connector. -
A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. Dale RS-10, 100K ohm, 10 Watt wire wound ballast resistor. Recommended for large HeNe laser tubes that operate up to 10mA. -
A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. Dale CW-10, 50K ohm, 10 Watt wire wound ballast resistor. Recommended for large HeNe laser tubes that operate up to 14mA. -
A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. Dale NS-5-69, 20K ohm, 5 Watt, non-inductive wire wound ballast resistor. Recommended for HeNe laser tubes that operate up to 15.8mA. -
These are new, old stock hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. SPECIFICATIONS: Manufacture / Part Number: Melles Griot, model 05-LHR-007 Output Power: 0.4 mW minimum Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.34 mm Beam Divergence: 2.40 mRads Light Exit: Cathode end of tube. Operating Voltage: 1220 VDC (with 68 K ballast) Start Voltage: 8 KV Operating Current: 2.7-4.0mA, 3.2mA Ideal Recommended Ballast Resistor: 68 K Ohms, 2 Watt (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15 Dimensions: 4.66" (118 mm) long x 0.89" (22.5 mm) diameter Warranty: Limited 30 days from date of purchase.
